Hematology Analyzer Reagents High Quality Hematology Reagent For Coulter Act 5diff Series Analyzers
Intended Use
To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Coulter Act 5Diff series hematology analyzers. This product is for In Vitro Diagnostic Use only.
APPLICABLE INSTUMENT
For use with Beckman coulter AcT 5diff, AcT 5diff AL, AcT 5diff OV hematology analyzers.
Storage
Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.
PRECAUTIONS
- Re-calibration is recommended when changing the origin of the reagents.
- It is not recommended using different brands of solutions together on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
- This kit is for professionals and in vitro diagnostic use only
Specification
L-8547167 | 5DIFF RINSE | 1 L |
L-8547168 | 5DIFF HGB LYSE | 400mL |
L-8547169 | 5DIFF DILUENT | 20L |
L-8547170 | 5DIFF WBC LYSE | 1 L |
L-8547171 | 5DIFF FIX | 1 L |
KIT COMPOSITION
5DIFF RINSE | Buffer<0.2%, Proteolytic Enzyme<0.3% |
5DIFF HGB LYSE | Quaternary Ammonium Salt<6.0% |
5DIFF DILUENT | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1% |
5DIFF WBC LYSE | Hydrochloric, Acid Detergent |
5DIFF FIX | Sodium, Chloride Formic Dye |
PROCEDURES
- Remove all the reagent aspiration tubes from the currently used reagent boxes
- Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
- Put all the tubes into the boxes and/or bottles of Labnovation reagents.
- Run at least 50 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
- Run all three levels of a dedicated commercial control. Check for the acceptable values.
- Recalibrate the unit if necessary.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations with original brand