Hematology Reagent For Sysmex Xt-2000i, Xt-1800i Analyzers Best Performance Hematology Analyzer Reagents
Intended Use
To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Sysmex XT-2000i, XT-1800i hematology analyzers. This product is for In Vitro Diagnostic Use only.
Precautions
- Re-calibration is recommended when changing the origin of the reagents.
- It is not recommended using different brands of solutions together on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
- This kit is for professionals and in vitro diagnostic use only.
Specification
| 20-10-020 | DILUENT-ST | 20 L |
| 23-30-FFD | 4DL-LYSER | 5 L |
| 23-30-FFS-8-01 | 4DS-LYSER | 1 L |
| 23-30-SLS-A05 | SLS-LYSER | 500ML×3 |
| 23-30-FBA-A5 | FB-LYSER | 5 L |
| 21-CL-50 | CELL-CLEANER | 50 ML |
KIT COMPOSITION
| DILUENT-ST | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1.0% |
| 4DL-LYSER | Non-ionic Surfactant<0.2% |
| 4DS-LYSER | Ethylene glycol＞90%, Polymethine dye＜0.006% |
| SLS-LYSER | Sodium Lauryl Sulfate<0.2% |
| FB-LYSER | Non-ionic Surfactant<0.5% |
| CELL-CLEANER | Sodium Hypochlorite 5% |
Procedures
- Remove the diluents tubing from the currently used Cellpack.
- Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
- Loosen and remove the cap on the cubitainers or bottles or sachet, attach the dispenser assembly to the cubintainer or bottle or sachet, then tighten the caps.
- Connect the other reagents to the analyzer in the same way.
- Prime the reagents though the instrument completely according to the operator’s manual.
- Recalibrate the unit if necessary.
Storage
- Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
- The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations with original brand
